Pin Names

A0 - A10 Address Inputs

I/O1 - I/O8 Data Input/Outputs

CS* Chip Select Input (Active LOW)

WE* Write Enable Input (Active LOW)

OE* Output Enable Input (Active LOW)

Vcc Power (+5Vdc)

GND Ground (0Vdc)

Operating Characteristics

Vcc = 5V +- 5%

GND = 0V

Supply Current = 10 to 100mA depending on manufacturer and fabrication process

Read Timing (Standard 6116-90)

Chip Select Access Time = 90ns min

Chip Deselect Access Time = 40ns max

Write Timing (Standard Grade)

Write Cycle Time = 90ns min

Write Pulse Width = 55ns min

Address Setup Prior to Write = 0ns

Chip Select to End of Write = 55ns min

Write Recovery Time = 0ns

Used In

Bally/Midway - TRON, Two Tigers, Kickman, Satan's Hollow, Timber, Wacko, etc.

Sega - Championship Baseball, etc.

Capcom - Ghosts and Goblins, etc.

Atari - Dig Dug, Xevious, etc.

Cross-references to

2016/6116:

Can substitute:

2016 and 6116 parts can generally be substituted for each other. Be careful to note if the device will serve as battery-backed memory for parameters, high scores, etc. If so, use a CMOS (6116) series part for longer battery life.

In a pinch, Cache RAM can be substituted (the extra speed Cache RAM provides will not be utilized, but if you have some in your parts-box...) although it's usually in a "skinny dip" type package (0.3" wide).

6116 compatible Cache RAM:

Source of information

Fairchild Bipolar Memory Data Book, 1983

Fujitsu Microelectronics Memory Data Book, 1982

United Microelectronics Corporation Memory IC's Data Book, 1990-1991

NEW Electronics Inc. Memory Products Data Book, 1985